Large-Capacity CO₂ Incubators for Cell Culture and Microbiology
Percival B-3600 and B-36: 840-litre CO₂ incubators for labs that have outgrown benchtop units. What sets them apart:
- Capacity: 840 litres on six adjustable shelves, for flasks, roller bottles, bags and screening plates in one controlled space.
- Infrared CO₂ sensor with additive CO₂ up to 10%, plus additive humidity control.
- Wide temperature range, 2 to 70 °C, so the same chamber covers cell culture, microbiology and below-ambient work.
- Data you can defend: a SCADA/LIMS port for recording that supports 21 CFR Part 11 and GMP Annex 11 work.
- IntellusUltra touchscreen controller with alarms and experiment protection.
One chamber replaces a row of benchtop incubators, with one controller, one set of records and one service contract.
JKG BioScience supplies Percival B-3600 and B-36 large-capacity CO₂ incubators: 840-litre reach-in chambers with six shelves, an infrared CO₂ sensor and the IntellusUltra touchscreen controller. Our own team handles installation, commissioning, training and service.
- Mammalian cell and tissue culture
- Biologics, vaccine and biosimilar development
- Cell and gene therapy research
- Large-volume microbial culture
- Microbial production of enzymes and antibiotics
- Cosmetic, food and toxicology testing
Typical Conditions for Cell and Microbial Culture
General starting points. Your cell line, medium and protocol set the exact values. Open dishes and multi-well plates need about 90–95% RH to limit evaporation; the B-3600 controls humidity up to 70% RH, so it is best suited to sealed or vented flasks, roller bottles, culture bags and plates kept in humidified boxes.
| Culture | Temperature | CO₂ | Notes |
|---|---|---|---|
| Mammalian cell lines (CHO, HEK293, HeLa, Vero) | 37 °C | 5% | Match CO₂ to the bicarbonate in the medium to hold pH 7.2–7.4; some media are made for 7.5–10% |
| Primary cells and stem cells | 37 °C | 5% | Sensitive to temperature and pH swings; keep door openings short |
| Insect cell lines (Sf9, High Five) | 26–28 °C | Not usually needed | Needs cooling in a warm laboratory; the refrigerated B-3600 holds this range |
| CO₂-dependent bacteria (e.g. Neisseria, Haemophilus) | 35–37 °C | 5–10% | Elevated CO₂ improves growth on primary isolation plates |
| Microbial production of enzymes and antibiotics | Set by the organism, often 25–37 °C | As per protocol | Large shelf area holds many flasks or plates per run |
Percival Large-Capacity CO₂ Incubators
Infrared CO₂ control
IntellusUltra controller
SCADA/LIMS connection
Qualification and service
Keeping Cultures Healthy and Results Repeatable
Verify CO₂ and temperature
Keep contamination out
Catalogues and Compliance Documents
Frequently Asked Questions
What does a CO₂ incubator do in cell culture?
It holds cultures at a set temperature, CO₂ level and humidity. The CO₂ dissolves in the medium and balances its sodium bicarbonate buffer, keeping pH near 7.2–7.4, the range most mammalian cells need. Humidity limits evaporation, which would otherwise concentrate the medium.
Why do most labs run CO₂ incubators at 5% CO₂?
Most culture media contain sodium bicarbonate at a level designed for 5% CO₂. Some, such as DMEM with 3.7 g/L bicarbonate, are formulated for around 10%. Setting CO₂ to match the medium keeps the pH correct, which is why the B-3600 and B-36 control CO₂ from ambient up to 10%.
What is the difference between the Percival B-3600 and B-36?
Both have an 840-litre, six-shelf stainless-steel chamber, an infrared CO₂ sensor and the IntellusUltra controller. The B-3600 is refrigerated and runs from 2 to 70 °C, so it holds 37 °C, or lower setpoints such as 27 °C for insect cells, even in a warm laboratory, and it humidifies and dehumidifies actively. The B-36 heats only, from 5 °C above ambient to 70 °C, and uses a pan humidifier.
Is a large CO₂ incubator suitable for open dishes and plates?
Open dishes and multi-well plates lose medium quickly unless humidity is around 90–95% RH. The B-3600 controls humidity up to 70% RH, so it suits sealed or vented flasks, roller bottles, culture bags and plates kept in humidified boxes. Tell us your vessels and workload and we will advise.
Can the incubators support GMP and regulated pharmaceutical work?
The IntellusUltra controller has a SCADA/LIMS port for recording and tracking data in your own system, which Percival states supports 21 CFR Part 11 and GMP Annex 11 compliance. JKG offers IQ/OQ/PQ documentation as an option, along with preventive maintenance and AMCs.
Who installs and services the incubators?
JKG BioScience’s own team installs, commissions and services every chamber we supply, and trains your users. We work with laboratories across India and neighbouring countries and usually reply to enquiries within one working day.