Products

Laboratory Centrifuges

The full TOMY centrifuge range, from refrigerated microcentrifuges to 60,110 ×g high-speed and plate-ready low-speed models, supplied, installed and serviced by JKG.
TOMY MDX-310 / 210 / 110 high-speed refrigerated micro centrifuges

Laboratory Centrifuges: The Full TOMY Range

Japanese-built TOMY centrifuges, from personal mini spinners to 60,110 ×g high-speed refrigerated models, supplied, installed and serviced by JKG. What sets them apart from basic low-cost centrifuges:

  • Induction motors with microprocessor feedback speed control, so there are no carbon brushes to wear out and speed holds steady run after run.
  • Refrigeration down to −9 °C on refrigerated models, with a PRE-TEMP function to pre-cool the chamber before samples go in.
  • Safety you can rely on: imbalance and over-speed detection, lid interlock and, on the MDX series, automatic rotor identification.
  • Rotors for real workflows: microtubes, 15 and 50 ml conical tubes, PCR plates, deep-well plates and bottles up to 1,000 ml.
  • Local support: installation, AMCs, rotor advice and spares from JKG.

Tell us your tube or plate format, sample volume and the speed your protocol needs, and we will recommend the model and rotor.

Why TOMY
Range

TOMY Centrifuges We Supply

TOMY MDX-310 / 210 / 110 high-speed refrigerated micro centrifuges

Refrigerated microcentrifuges: MDX-310, MDX-210, MDX-110

15,000 rpm, up to 21,890 ×g and −9 to +35 °C for DNA, RNA and protein work. The MDX-310 uses TOMY’s Rack-in-Rotor system: a lightweight bucket rotor with drop-in racks for microtubes, 15 and 50 ml tubes and PCR plates. Touchscreen and jog-dial control, ECO mode and short-spin function.

TOMY Suprema 25 / 21 high-speed refrigerated centrifuge

High-speed, low-speed and benchtop centrifuges

Suprema 25 and 21: high-speed refrigerated, up to 60,110 ×g and bottles up to 1,000 ml. CAX-571: hybrid refrigerated, 21,130 ×g with 4 × 250 ml. AX-521, AX-511, AX-501 and NIX-521: low-speed refrigerated for tubes, bottles and up to eight deep-well plates; the NIX-521 also runs warm, to +42 °C. LCX-200 and LCX-100: benchtop, non-refrigerated. Wonder Spin: personal mini centrifuges for quick spin-downs.

Specifications

TOMY Centrifuge Specifications

TOMY Suprema 25 / 21 high-speed refrigerated centrifuge

Suprema 25 / 21

TOMY CAX-571 hybrid refrigerated centrifuge

CAX-571

TOMY AX-521 / 511 / 501 low-speed refrigerated centrifuge

AX-521 / 511 / 501

TOMY NIX-521 low-speed refrigerated and dual-temperature centrifuge

NIX-521

TOMY LCX-200 / 100 low-speed bench-top centrifuge

LCX-200 / 100

TOMY Wonder Spin Multi Spin mini personal centrifuge

Wonder Spin Multi Spin

TOMY Wonder Spin One Spin mini personal centrifuge

Wonder Spin One Spin

ModelTypeMax speedMax RCFMax capacityTemperature
MDX-310High-speed refrigerated micro15,000 rpm21,890 ×g50 ml × 4−9 to +35 °C
MDX-210High-speed refrigerated micro15,000 rpm20,380 ×g30 ml × 6−9 to +35 °C
MDX-110High-speed refrigerated micro15,000 rpm20,380 ×g2 (1.5) ml × 24−9 to +35 °C
Suprema 25High-speed refrigerated25,000 rpm60,110 ×g1,000 ml × 6−9 to +35 °C
Suprema 21High-speed refrigerated21,000 rpm46,850 ×g1,000 ml × 4−9 to +35 °C
CAX-571Hybrid refrigerated15,000 rpm21,130 ×g250 ml × 4−9 to +35 °C
AX-521Low-speed refrigerated10,000 rpm11,740 ×g8 deep-well plates (1,536 ml)−9 to +35 °C
AX-511, AX-501Low-speed refrigerated10,000 rpm11,740 ×g250 ml × 4−9 to +35 °C
NIX-521Low-speed refrigerated, dual-temperature10,000 rpm11,740 ×g8 deep-well plates (1,536 ml)−9 to +42 °C
LCX-200, LCX-100Low-speed benchtopUp to 10,000 rpm11,740 ×g250 ml × 4Non-refrigerated
Wonder Spin Multi SpinPersonal mini centrifugeAbout 6,000 rpmUp to 2,960 ×gMicrotubes, PCR stripsNon-refrigerated
Wonder Spin One SpinPersonal mini centrifugeAbout 4,000 rpmUp to 1,000 ×g1.5 and 2.0 ml tubesNon-refrigerated
Features

Why Laboratories Choose TOMY Centrifuges

Induction motor drive

Brushless induction motors with microprocessor feedback control hold set speed and avoid the carbon-brush wear and dust of basic motors.

Built-in protection

Imbalance, over-speed, overheat and over-cool detection with a lid interlock; MDX models also identify the rotor automatically.

Fast pre-cooling

PRE-TEMP brings the chamber to temperature before your run; the CAX-571 reaches set temperature in about 3 minutes after ECO mode.

TOMY Rack-in-Rotor system

Rack-in-Rotor

On the MDX-310, one lightweight bucket rotor takes drop-in racks for microtubes, conical tubes and PCR plates.

Flex-Spin direct drive

CAX, AX and NIX models use a direct drive with automatic alignment for smooth, quiet runs.

Mobile and compact

Vertical, top-loading design on castors with stoppers, needing only 20 cm behind for the lid.

Typical Uses

  • DNA, RNA and protein preparation
  • Cell harvesting and pelleting
  • Blood and plasma separation
  • Microplate and deep-well plate processing
  • Large-volume bottle pelleting
  • Quick spin-downs at the bench
Buying guide

How to Choose a Laboratory Centrifuge

Start from your sample format and the force your protocol needs. For microtubes and molecular work at up to about 21,000 ×g, choose an MDX. For high-speed pelleting of larger volumes, up to 60,110 ×g, choose a Suprema. For tubes, bottles or deep-well plates at up to 11,740 ×g, choose an AX, the CAX-571 if you also need higher speeds, or the NIX-521 if you also need to run warm. If samples do not need cooling, the LCX benchtop models or a Wonder Spin are enough. We will confirm the rotor and adapters for your tubes.

Rotors and accessories
Tender and compliance documents

Catalogues and Compliance Documents

Catalogues, datasheets and certificates for purchase files and government tenders. Need a document that is not listed? Ask us.
PDFTOMY centrifuge cataloguesRequest →
PDFCentrifuge and rotor specification sheetsRequest →
PDFOEM authorisation certificateRequest →
PDFQuality certification (ISO)Request →
PDFCustomer installation listRequest →
FAQ

Frequently Asked Questions

Answers to the questions we hear most. Can’t find what you need? Our team will help.

The full TOMY range: MDX-310, MDX-210 and MDX-110 refrigerated microcentrifuges, Suprema 25 and 21 high-speed refrigerated centrifuges, the CAX-571 hybrid, AX-521, AX-511, AX-501 and NIX-521 low-speed refrigerated models, LCX-200 and LCX-100 benchtop models and Wonder Spin mini centrifuges.

The Suprema 25 reaches 25,000 rpm and 60,110 ×g.

The MDX, Suprema, CAX, AX and NIX models, from −9 °C. The NIX-521 also runs warm, to +42 °C.

Yes. The AX-521 and NIX-521 take up to eight deep-well plates, and the MDX-310 takes PCR plates with its Rack-in-Rotor racks.

It depends on the model, rotors and adapters. Tell us your tubes or plates and the speed you need and we will send a quotation, usually within one working day.

Yes. JKG installs and commissions them, trains your users and supports them with preventive maintenance, AMCs, rotor advice and spare parts.

Yes. We provide catalogues, specification sheets and OEM authorisation for purchase files and government tenders.

Related equipment

Let's Build Your Research Setup

Tell Us About Your Requirement

Share your application and requirements, and our team will help you identify suitable equipment.