Laboratory Centrifuges: The Full TOMY Range
Japanese-built TOMY centrifuges, from personal mini spinners to 60,110 ×g high-speed refrigerated models, supplied, installed and serviced by JKG. What sets them apart from basic low-cost centrifuges:
- Induction motors with microprocessor feedback speed control, so there are no carbon brushes to wear out and speed holds steady run after run.
- Refrigeration down to −9 °C on refrigerated models, with a PRE-TEMP function to pre-cool the chamber before samples go in.
- Safety you can rely on: imbalance and over-speed detection, lid interlock and, on the MDX series, automatic rotor identification.
- Rotors for real workflows: microtubes, 15 and 50 ml conical tubes, PCR plates, deep-well plates and bottles up to 1,000 ml.
- Local support: installation, AMCs, rotor advice and spares from JKG.
Tell us your tube or plate format, sample volume and the speed your protocol needs, and we will recommend the model and rotor.
- Full range: micro, high-speed, low-speed, benchtop
- Up to 25,000 rpm and 60,110 ×g (Suprema 25)
- Refrigerated models from −9 °C
- Induction motors, no carbon brushes
- Rotor identification and imbalance detection
- Japanese build, serviced locally by JKG
TOMY Centrifuges We Supply
Refrigerated microcentrifuges: MDX-310, MDX-210, MDX-110
15,000 rpm, up to 21,890 ×g and −9 to +35 °C for DNA, RNA and protein work. The MDX-310 uses TOMY’s Rack-in-Rotor system: a lightweight bucket rotor with drop-in racks for microtubes, 15 and 50 ml tubes and PCR plates. Touchscreen and jog-dial control, ECO mode and short-spin function.
High-speed, low-speed and benchtop centrifuges
Suprema 25 and 21: high-speed refrigerated, up to 60,110 ×g and bottles up to 1,000 ml. CAX-571: hybrid refrigerated, 21,130 ×g with 4 × 250 ml. AX-521, AX-511, AX-501 and NIX-521: low-speed refrigerated for tubes, bottles and up to eight deep-well plates; the NIX-521 also runs warm, to +42 °C. LCX-200 and LCX-100: benchtop, non-refrigerated. Wonder Spin: personal mini centrifuges for quick spin-downs.
TOMY Centrifuge Specifications
Suprema 25 / 21
CAX-571
AX-521 / 511 / 501
NIX-521
LCX-200 / 100
Wonder Spin Multi Spin
Wonder Spin One Spin
| Model | Type | Max speed | Max RCF | Max capacity | Temperature |
|---|---|---|---|---|---|
| MDX-310 | High-speed refrigerated micro | 15,000 rpm | 21,890 ×g | 50 ml × 4 | −9 to +35 °C |
| MDX-210 | High-speed refrigerated micro | 15,000 rpm | 20,380 ×g | 30 ml × 6 | −9 to +35 °C |
| MDX-110 | High-speed refrigerated micro | 15,000 rpm | 20,380 ×g | 2 (1.5) ml × 24 | −9 to +35 °C |
| Suprema 25 | High-speed refrigerated | 25,000 rpm | 60,110 ×g | 1,000 ml × 6 | −9 to +35 °C |
| Suprema 21 | High-speed refrigerated | 21,000 rpm | 46,850 ×g | 1,000 ml × 4 | −9 to +35 °C |
| CAX-571 | Hybrid refrigerated | 15,000 rpm | 21,130 ×g | 250 ml × 4 | −9 to +35 °C |
| AX-521 | Low-speed refrigerated | 10,000 rpm | 11,740 ×g | 8 deep-well plates (1,536 ml) | −9 to +35 °C |
| AX-511, AX-501 | Low-speed refrigerated | 10,000 rpm | 11,740 ×g | 250 ml × 4 | −9 to +35 °C |
| NIX-521 | Low-speed refrigerated, dual-temperature | 10,000 rpm | 11,740 ×g | 8 deep-well plates (1,536 ml) | −9 to +42 °C |
| LCX-200, LCX-100 | Low-speed benchtop | Up to 10,000 rpm | 11,740 ×g | 250 ml × 4 | Non-refrigerated |
| Wonder Spin Multi Spin | Personal mini centrifuge | About 6,000 rpm | Up to 2,960 ×g | Microtubes, PCR strips | Non-refrigerated |
| Wonder Spin One Spin | Personal mini centrifuge | About 4,000 rpm | Up to 1,000 ×g | 1.5 and 2.0 ml tubes | Non-refrigerated |
Why Laboratories Choose TOMY Centrifuges
Induction motor drive
Brushless induction motors with microprocessor feedback control hold set speed and avoid the carbon-brush wear and dust of basic motors.
Built-in protection
Imbalance, over-speed, overheat and over-cool detection with a lid interlock; MDX models also identify the rotor automatically.
Fast pre-cooling
PRE-TEMP brings the chamber to temperature before your run; the CAX-571 reaches set temperature in about 3 minutes after ECO mode.
Rack-in-Rotor
On the MDX-310, one lightweight bucket rotor takes drop-in racks for microtubes, conical tubes and PCR plates.
Flex-Spin direct drive
CAX, AX and NIX models use a direct drive with automatic alignment for smooth, quiet runs.
Mobile and compact
Typical Uses
- DNA, RNA and protein preparation
- Cell harvesting and pelleting
- Blood and plasma separation
- Microplate and deep-well plate processing
- Large-volume bottle pelleting
- Quick spin-downs at the bench
How to Choose a Laboratory Centrifuge
Start from your sample format and the force your protocol needs. For microtubes and molecular work at up to about 21,000 ×g, choose an MDX. For high-speed pelleting of larger volumes, up to 60,110 ×g, choose a Suprema. For tubes, bottles or deep-well plates at up to 11,740 ×g, choose an AX, the CAX-571 if you also need higher speeds, or the NIX-521 if you also need to run warm. If samples do not need cooling, the LCX benchtop models or a Wonder Spin are enough. We will confirm the rotor and adapters for your tubes.
- Angle and swing rotors for tubes and bottles
- Rack-in-Rotor racks for the MDX-310
- Microplate and deep-well plate carriers
- Adapters for 15 and 50 ml conical tubes
- Sealed buckets and caps
Catalogues and Compliance Documents
Frequently Asked Questions
Which TOMY centrifuges does JKG supply?
The full TOMY range: MDX-310, MDX-210 and MDX-110 refrigerated microcentrifuges, Suprema 25 and 21 high-speed refrigerated centrifuges, the CAX-571 hybrid, AX-521, AX-511, AX-501 and NIX-521 low-speed refrigerated models, LCX-200 and LCX-100 benchtop models and Wonder Spin mini centrifuges.
Which TOMY centrifuge is the fastest?
The Suprema 25 reaches 25,000 rpm and 60,110 ×g.
Which models are refrigerated?
The MDX, Suprema, CAX, AX and NIX models, from −9 °C. The NIX-521 also runs warm, to +42 °C.
Can TOMY centrifuges spin microplates?
Yes. The AX-521 and NIX-521 take up to eight deep-well plates, and the MDX-310 takes PCR plates with its Rack-in-Rotor racks.
What does a TOMY centrifuge cost?
It depends on the model, rotors and adapters. Tell us your tubes or plates and the speed you need and we will send a quotation, usually within one working day.
Do you install and service the centrifuges?
Yes. JKG installs and commissions them, trains your users and supports them with preventive maintenance, AMCs, rotor advice and spare parts.
Do you supply documents for tenders and GeM?
Yes. We provide catalogues, specification sheets and OEM authorisation for purchase files and government tenders.